Visit The Dirt Forum for More Information

Author Topic:   Building A 1983 Monte Carlo For Hobby Stock
towman1986
Dirt Newbie

Total posts: 1
posted April 24, 2003 02:51 PM  
I recently purchased this car and i was wondering which is the best motor set up to run the car came with a 305Ho I have a new style 350 Block i was wondering which is the best parts to buy to build this motor thanks all that reply

racer17j
Dirt Forum Champ
Total posts: 5390
posted April 24, 2003 02:59 PM  
When did the "newer" style 350 start?

racer17j
Dirt Forum Champ
Total posts: 5390
posted April 25, 2003 01:27 AM  
Towman,


If the rules say that you have to run a motor that came out in that car, does it say for that manufacturer or that type of car?

Many rules are worded so you could run an old vette engine in that monte.

sideways
Dirt Forum Champ
Total posts: 715
posted April 27, 2003 07:27 PM  
I race a new style single peice rear seal block(97 vortec truck block).17 is right the stuff is more expensive.The oil pan gasket is $40 byitself.If ya dont have a crank and stuff that may get expensive.But as far as heads and intake I run older heads and intake the deck on the new block is taller than the older ones.I found out all this after I got into the block.So just giving you something to go on here.

powerglides
Dirt Freak

Total posts: 374
posted April 28, 2003 09:50 AM  
I would take the heads, crank, and rods from the 305. Buy light hyper pistons and have it all put in the 350 block if they have the same style rear main seal. A good blue racer cam and run it. Cheap and quick. Lets get on the track before we think about having the fastest best motor out there.

twleach2
Dirt Full Roller

Total posts: 53
posted May 02, 2003 12:48 PM  
I also have an 83 monte. Spend the money on the handling, springs, shocks, tires, etc. Motor with horsepower is useless if the car does not handle. I learned the hard way. Car now looks like a derby car.

Back to the Archives