Visit The Dirt Forum for More Information

Author Topic:   gear selector questions
blackbart
Dirt Roller

Total posts: 16
posted April 09, 2003 09:33 PM  
I run an 86 cutlass supreme with a 350 turbo transmission. The last few years I ran a rod down to the trans but found that it was very hard to select reverse because of the stiffness of the shifter. Any ideas on what other guys run or improvements I could make?

Pickel
Dirt Forum Champ
Total posts: 784
posted April 09, 2003 09:53 PM  
Thanx dreamcatcher! I did pretty much what you suggested and it worked great. I used flat stock as the linkage and a light piece
of square tubing to bolt the pivot to. Thanx again. BlackBart.

powerglides
Dirt Freak

Total posts: 374
posted April 11, 2003 06:14 AM  
I love these no dollar, homemade parts. Thats what it is all about!

Back to the Archives