posted January 30, 2003 12:38 PM
I`m running a turbo 350 and need to know what gear to run that would bee good on both tracks 1/4 & 3/8 both are simi banked dirt tracks
flywheel Dirt Full Roller
Total posts: 28
posted January 30, 2003 12:45 PM
a set of 2.73 and run 1st gear or a set of 4.55 and run second gear. Then just adjust tire size to fit your desires.
racer17j Dirt Forum Champ
Total posts: 5390
posted January 30, 2003 03:15 PM
you really like to twist em dont you, 3.08's would give him a 7.7 final with a turbo 350 in first gear (1.52). I run 2.73's with 78-82inch tires and I turn right around 5800-6000.
redneck bubbas racing Dirt Freak
Total posts: 283
posted January 31, 2003 04:23 PM
I've always ran a 2.73 when running both size tracks. As long as the 1/4 isn't too paper clip styled you will do fine.
rico 08 Dirt Forum Champ
Total posts: 1139
posted January 31, 2003 05:37 PM
1ST IN A 350TURBO IS 2.48 I'D RUN A 2.41 GEAR AND A SHORTER ROLLOUT FOR 1/4 MILE.
Flatlander Dirt Freak
Total posts: 355
posted January 31, 2003 08:06 PM
I'd run a656 on the 3/8 use a slightly smaller tireand just hold your foot in it you'll have to run in deep and breathe it then hit it again to keep it rolling om the 1/4