Visit The Dirt Forum for More Information

Author Topic:   steering colum
racer17j
Dirt Forum Champ
Total posts: 5390
posted January 27, 2003 11:41 AM  
I think the old MC 72-77 may be about right if not will they not let you sleeve the bottom to extend it?

racer17j
Dirt Forum Champ
Total posts: 5390
posted January 27, 2003 04:17 PM  
There is a teflon pin in the steering shaft.
drill it out and you can get 3" more

This is the same thing you have to do on a 4x4 truck to make the steering long enough
to put a 3" body lift on it.

20bmw

racer17j
Dirt Forum Champ
Total posts: 5390
posted January 27, 2003 10:07 PM  
What about this move yous wheel to where you want cut the steering shaft abut 6in outside the firewall put a flange bearing on the out side of the firewall the use the hollw tube to reconnect the shaft

racer17j
Dirt Forum Champ
Total posts: 5390
posted January 28, 2003 12:18 AM  
yeah I see your problem there I don't guess there would be a way to strap it maybe add a small bar down low and use a u type clamp on the top and bottom?

racer17j
Dirt Forum Champ
Total posts: 5390
posted January 28, 2003 12:09 PM  
try an older cadillac or full size car,lengthening the lower tube before the firewall mounting flange shouldn't be that difficult.

nate 11
Dirt Freak

Total posts: 316
posted January 28, 2003 08:32 PM  
do the rules allow you to extend the steering shaft out longer where the steering wheel connects? if so weld a coupler on the shaft then slide another shaft into it with steering wheel hub welded to it for your wheel release. support it up with a piece round or square tubing welded to roll cage with shaft going thur and oversize steering shaft support heim. hope this makes sence.lol

marple
Dirt Maniac

Total posts: 147
posted January 28, 2003 09:25 PM  
use the column out of a 77 olds 98.its a telescoping unit.they move out 4 inches further than a normal steering column.

racer17j
Dirt Forum Champ
Total posts: 5390
posted January 28, 2003 09:36 PM  
thanks guys nate that is what i was going to do but they said no go they put this rule in to keep the set back cages out of the class but you know i'm a racer so i gotta find a way to get around the rules some how lol i tried one off my 84 le sabre but it's actully shorter then the metric one think i may just have to cut the knuckle out and run a straight tube down to it thats where we ran into trouble with the other one was that knuckle

Back to the Archives