posted January 16, 2003 06:30 PM
I have a set of sbc heads missing a rocker stud....are the studs pressed in or threaded? or what do I need to do to repair this.
rfb320 Dirt Maniac
Total posts: 150
posted January 16, 2003 10:11 PM
the studs are pressed in from the factory.if they were ***** in studs you could easily see the threads.you should be able to buy a new press in stud a most parts stores.
Flatlander Dirt Freak
Total posts: 355
posted January 17, 2003 10:11 PM
if you stay with press in be sure and pin them just takes a little while and is well worth the work IMO
30rulz Dirt Forum Racer
Total posts: 87
posted January 18, 2003 05:46 PM
thanks guys... I went to the parts store and they had a ***** in stud and I milled the head down some and threaded it in and now it's like new