posted December 05, 2002 02:21 PM
I have heard that the 2 bbl Canadian intake manifold was supposed to be a good choice for pure stock engines (350 engine). I have several part numbers for Canadian intakes for sale, but I am not sure if they are the best ones. The part number I have is 3979467 with Canada K stamped under the firing order and no EGR valve. Is this the correct Canadian intake to use? Thanks for any assistance!
redneck bubbas racing Dirt Freak
Total posts: 283
posted December 07, 2002 09:14 PM
Not sure if that is one of them, most that I have seen have been the 313 casting number. Maybe somebody else knows.
jhon hollomon Dirt Freak
Total posts: 468
posted December 08, 2002 09:33 PM
I looked through all of my notes and on the web and couldn't find anything to match that number. I found some with similar numbers. Are you sure those are the right numbers?
Racerboy13 Dirt Roller
Total posts: 21
posted December 13, 2002 06:44 PM
I will agree with you, the Canadian 2 BBL intake is about the best around, but be sure that it is the intake with the bigger openings in the top of the intake manifold.