Visit The Dirt Forum for More Information

Author Topic:   taps.
KPLugnut
Dirt Forum Champ
Total posts: 1019
posted January 15, 2005 07:06 PM  
In reference to the radius rods post....sorry, I hit "new thread" by accident....

www.mscdirect.com www.use-enco.com www.travers.com

There's others, but they're the easiest and least expensive places.

KP

[This message has been edited by KPLugnut (edited January 15, 2005).]

dbradley
Dirt Freak

Total posts: 251
posted January 16, 2005 06:21 AM  
Thanks KP
Have any clue which ones(type thread) are on rod ends
D

KPLugnut
Dirt Forum Champ
Total posts: 1019
posted January 16, 2005 02:39 PM  
They're either 5/8" or 3/4", sometimes 1/2" depending on where on the car, and the size of the heim end. All will be fine thread, not coarse threads, and one will be right handed thread and the other end usually is left handed thread so that the length can be adjusted without having to disconnect one end.
It's hard to tell ya what size, because I don't know what size radius rods you have. They range from 1/4" (throttle) up to 3/4" (big suspension ends on control arms).

Hope that helps,
KP

Back to the Archives