Visit The Dirt Forum for More Information

Author Topic:   , spring or rubber pull bars
bakersfield basher 8
Dirt Newbie

Total posts: 3
posted December 09, 2005 09:34 PM  
Stright rate spring 1050lb or higher to start. 1/4 preload.

20crew
Dirt Full Roller

Total posts: 43
posted December 10, 2005 12:16 PM  
Start out at what the chassis builder suggest & adjust spring rates to get the
desired travel. but remember that if you lr
spring is clamped in front its spring rate will affect pull bar travel.

GRTmod
Dirt Full Roller

Total posts: 37
posted December 11, 2005 03:48 PM  
I've always liked a rubber on a 4-bar and spring on anything else.

Back to the Archives