Visit The Dirt Forum for More Information

Author Topic:   metric help needed
rockinron
Dirt Full Roller

Total posts: 33
posted November 25, 2005 07:24 PM  
I have a pierce design mod. Could you tell me what centerlink,idler and pitman arms, inner tie rods.

The mod I have has pinto spindles. Also, what upper and lower ball joints do I run?

donslink1
Dirt Freak

Total posts: 331
posted November 25, 2005 08:01 PM  
The way Bob runs them with metric spindles.
drag link idler arm and pitman arm is from a 78-88 monte carlo or cutlass ball joints are 32-1 and 38-1 AFCO part# inner tie rods I dont have the part# in front of me but I know they are off a camaro.
are you saying some one copied a Pierce car or Bob actualy designed this car?

rockinron
Dirt Full Roller

Total posts: 33
posted November 26, 2005 05:09 PM  
Thanks for all your help. It saves me a lot of trouble.

But, I really dont think it was Bob's design in the first place. But, who is complaining right? Thanks, again.

I think the inner tie rods are off a 80 style camaro.

Back to the Archives