Visit The Dirt Forum for More Information

Author Topic:   REAR-END OFFSET- PIERCE?
GRTWallbanger
Dirt Maniac

Total posts: 196
posted October 29, 2005 01:24 PM  
How do I measure off-set on my rear-end.I have a 31 inch right axle and a 30 left.Deos this mean I have a 1 inch offset???
And does anybody know what the Pierce cars take.I think i read that he uses a 4 inch offset??Does that make it a 26 inch left axle and a 30 right?
(We are looking at getting a Pierce chassis but need to know how much stuff we would need to get for it.)

superdave
Dirt Freak

Total posts: 280
posted October 30, 2005 07:23 AM  
Try this http://www.1speedway.com/Rear_End_Measurement_Page.htm

Kromulous
Dirt Forum Champ
Total posts: 796
posted October 30, 2005 04:09 PM  
Pierce cars use a 60" with a 2" offset.

I believe that would be a 34" and 26.5" axles, someone correct me if i'm wrong there.

Krom.

[This message has been edited by Kromulous (edited October 31, 2005).]

48modracer
Dirt Roller

Total posts: 12
posted October 31, 2005 11:04 AM  
My coleman is 26 1/2 LR and 34 on the right. 60 inch housing with the 2 inch offset is correct though for the Pierce car.

[This message has been edited by 48modracer (edited October 31, 2005).]

fr1
Dirt Forum Racer

Total posts: 93
posted October 31, 2005 11:20 AM  
Erased, I must have been dyslexic in another life.

[This message has been edited by fr1 (edited November 01, 2005).]

donslink1
Dirt Freak

Total posts: 318
posted October 31, 2005 02:26 PM  
48modracer is right.

Back to the Archives