Visit The Dirt Forum for More Information

Author Topic:   KSE pump
hamer36
Dirt Maniac

Total posts: 196
posted October 12, 2005 04:37 PM  
How hard is it to rebuild a KSE tandem pump? Or should I just send it in? If so, where? Thanks in advance

rpm20
Dirt Freak

Total posts: 338
posted October 12, 2005 06:24 PM  
i sent mine to kse , its like 250.00 but youll know what you have then.

dirtbuster
Dirt Forum Champ
Total posts: 2007
posted October 13, 2005 05:39 AM  
KSE will test it when they are done to make the pressures are where they should be. And they can measure everything as they put it together to see if anything is worn and needs replaced.

But, its not that hard as long as you dont need any of the internal parts.

hamer36
Dirt Maniac

Total posts: 196
posted October 14, 2005 02:14 PM  
It works fine but leaks a little PS fluid between the sections. Bolts are tight. Its probobly just an O ring and I'd just do the PS side if thats possible. THX

moldy97
Dirt Roller

Total posts: 6
posted October 14, 2005 04:53 PM  
They are real simple i got the reseal kit from Performance Bodies and did it myself its just orings and like 3 seals i believe. Simple! I think the kit was 22.00 or something.

dirtbuster
Dirt Forum Champ
Total posts: 2007
posted October 17, 2005 04:33 AM  
if thats the only problem then you shouldn;t have any problem resealing it yourelf. Just make sure you mark everything when youtake it apart so that it goes back together in the same order or you will have problems. Id reccomend drawing a line down the side of it then when you put it back together if the line is still intact then everything is where it shoudl be.

Back to the Archives