Visit The Dirt Forum for More Information

Author Topic:   vavle cover breathers
Dirt Maniac

Total posts: 196
posted October 10, 2005 12:13 PM  
Has anybody ever seen a low-profile breather for the vavle cover?I want to keep them under the hood and the regular ones are to tall??

Dirt Forum Champ
Total posts: 755
posted October 11, 2005 05:26 AM  
I don't think I've seen anything like that but you might weld some fittings on your covers and run hoses to a remote breather can.

Dirt Freak

Total posts: 270
posted October 11, 2005 08:00 AM  
Mickey Thompson and Offenhauser used to have a breather that attached to the side of the V/C (carb side) and only came up about a 1/2 inch above the top of the V/C. Check with Moroso also.
This used to be the standard breather for the Drag Racers.

Dirt Forum Champ
Total posts: 5390
posted October 12, 2005 07:22 PM  
we used to run a set that had the holes on the inside then ran a hose to a set of breathers that sat right in front of the stat housing

Back to the Archives