posted October 02, 2005 04:01 PM
Is anyone using the rubber bushing J-Bar, and if so what difference have you found between the 2 if you have used both.
Dustejr73 Dirt Maniac
Total posts: 177
posted October 02, 2005 05:52 PM
i always used the rubber bushing jbar...i believe it is better because it takes some of the shock out of the rough tracks we run on...
Modracer86 Dirt Forum Racer
Total posts: 79
posted October 02, 2005 06:27 PM
I have always used the rubber bushing bar as well untill this past weekend i put a short bar on and will never run a j-bar again the car just came to life with the short bar.
chapa73 Dirt Maniac
Total posts: 169
posted October 03, 2005 01:50 PM
I went from a long solid strait bar behind the bousing(mouning on houing on the right side of rear-end,mounting on chassis on left) to the bushiing afco J-bar and liked that alot more.Wont never go to a long behind bar.
I think the bushing type is alittle more forgiving than a solid.JMO
hotwheels22 Dirt Newbie
Total posts: 4
posted October 03, 2005 04:10 PM
Thanks for your posts.
dirtdriver Dirt Roller
Total posts: 16
posted October 09, 2005 07:41 PM
i run solid bar behind raer end houing and i like it better then the rubber j-bsr type myself.