Visit The Dirt Forum for More Information

Author Topic:   2 link right or swing are
Todd83C
Dirt Full Roller

Total posts: 53
posted September 14, 2005 07:01 PM  
I am building a victory mod for next season and was wondering the ups and down of a 4 bar left z right compared to a 4 bar left 2 link right what setup works best all around?

washeduptoo
Dirt Maniac

Total posts: 155
posted September 14, 2005 08:22 PM  
We used to run the 4-z and now run the 4-2. We like the 4-2 better, our car is a whole lot smoother and took a rough track better. It didn't lift the lf as much. It might be it fit the driver better. We might go back and try the 4-z later,we were just figuring the 4-z out. A lot of people are fast on the 4-z, you have more adjustments for track conditions. Hope this helps

slasher
Dirt Roller

Total posts: 16
posted September 15, 2005 04:36 PM  
WASHEDUPTOO, Where are you running your springs and what size springs are you running on 4-2 thanks

IowaFuzzy1
Dirt Maniac

Total posts: 136
posted September 15, 2005 08:48 PM  
We ran the 4Z setup on our Victory this year,switched from panhard to shorty bar mid season,car really hooks .Spring on top lft. behind rt.

FlyNLoIMCA17
Dirt Forum Champ
Total posts: 753
posted September 15, 2005 09:03 PM  
Hey slasher,

Run both springs behind the housing, the LR on the birdcage and of course the RR clamped to the housing. If you elect to clamp the LR spring you put it up front.

If you will PM me and tell what stub you have, pull-bar type, bar lengths and what type panhard bar I will help you set it up. This 4-2 can be really fast and it handles the rough tracks like a 3-link but has the forward bite of a 4-link! Best of both worlds. I've never ran a 4-Z thou so I know nothing about them as comparing them to the 4-2.

washeduptoo
Dirt Maniac

Total posts: 155
posted September 16, 2005 04:04 AM  
We run spring behind on lr on a slider, rr behind on a c/o. Lr spring 225, rr 200. We got this set up from flynloimca17. He can help you more than I can, but if you need something else just PM me. Hope this helps.

Back to the Archives