posted August 29, 2005 05:25 PM
4-bar both sides 61%tail 175 lr spring on birdcage 200 rr on birdcage 75lbs bite 50.3 cross 52.5 left 700 rf 750 lf 2 1/4 stagger. no side bite and no forward bite tail comes out on entry???
also the rf shock got blown during race and the next corner it went straight to wall thought the rf was falt, is the rf spring to soft??? is the rr spring to soft??? is it too much tail???
Thanks in advance!
nvracer Dirt Maniac
Total posts: 127
posted August 30, 2005 08:31 PM
You didn't say where the springs are mounted in front or behind. I run 200#LR, 175#RR 750#RF, 700#LF Is the car turning on entry, through middle? The 750# will loosen entry, tighten on throttle. Also the car driving to the wall could be to much angle in the J-bar or panhard bar. Also running the LR Upper 1 hole higher on the chassis will also tighten on throttle.
DirtTrackRacingRules 3 8 Dirt Maniac
Total posts: 101
posted August 31, 2005 04:50 PM
the lr spring behind and rr in front j-bar already low and top 4bar link in top hole. The tail just skates to the wall