Visit The Dirt Forum for More Information

Author Topic:   HELP
Dirt Roller

Total posts: 16
posted August 21, 2005 12:53 PM  
Have a problem heres a little history on setup car is underslung with 4 bar left swing arm right spring on slider clamped behind on left, spring on swing arm on right lr upperbar at 21 degrees lower at 5degrees up weights with driver
lf 594 rf 524
lr 791 rr 609
rear 55.6
cross 52.2
total 2515
springs lf 900 rf 1000
lr 225 rr300
had 2inches stagger on rr car got really loose took it to 1 inch in feature it was tight in loose off any help would be appreciated also what would dropping angle in lr upper bar do ?

Dirt Maniac

Total posts: 182
posted August 21, 2005 07:30 PM  
try a little more cross weight, you have around 180# bite right now. i'd try 200 to 210 and see what happens. this should loosen up a little in and tighten off.

Dirt Maniac

Total posts: 180
posted August 21, 2005 07:45 PM  
If that spring behind CLAMPED is right, then that could be a lot of your problem. If it's clamped, it should be infront, if it's floated on the birdcage, then it should be in the back to tighten the car under throttle.

Back to the Archives