Visit The Dirt Forum for More Information

Author Topic:   Should I take out left bite???
dogwalker
Dirt Full Roller

Total posts: 65
posted August 11, 2005 02:14 PM  
Have a 4/z car and am in the process of changing the left rear from a spring on top of housing to clamped up in front on the left side only....just trying to get a little more left rear bite coming off the corner. Do I need to take some bite out to keep it from being too tight??? I'm assuming it's only going to be tighter when on the gas, so it may be okay as is. Would like some experienced advise so I don't show up with an ill handling monster.

Racer111
Dirt Freak

Total posts: 259
posted August 11, 2005 06:36 PM  
Take some bite out.

dirtzone
Dirt Maniac

Total posts: 102
posted August 12, 2005 04:02 AM  
Depends on how much lr you run now, but yep you won't need as much static lr. Good luck!

dogwalker
Dirt Full Roller

Total posts: 65
posted August 12, 2005 08:47 AM  
quote:
Originally posted by dirtzone:
Depends on how much lr you run now, but yep you won't need as much static lr. Good luck!


Right now it's at 190lbs. What do you recommend to take it down to?

Fastride 38
Dirt Maniac

Total posts: 125
posted August 12, 2005 11:02 AM  
100 to 140....mostly depends on what you are most comfortable with. I think if your running it at 190 now I'd start with 140.

------------------
Rattler Race Chassis's, Shaking up the Competition!


COMING SOON TO A TRACK NEAR YOU!!

dogwalker
Dirt Full Roller

Total posts: 65
posted August 12, 2005 02:27 PM  
quote:
Originally posted by Fastride 38:
100 to 140....mostly depends on what you are most comfortable with. I think if your running it at 190 now I'd start with 140.


Hey thanks a million for the help! Just hate to make a change and be out to lunch for a couple weeks.

Back to the Archives