Visit The Dirt Forum for More Information

Author Topic:   Street stock panhard
RACEINMUD
Dirt Freak

Total posts: 323
posted August 11, 2005 09:43 AM  
Hi, was hoping to get some advice from the mod drivers on adjusting the panhard for track conditions. I run a metric with the panhard mounted on the drivers side frame and rear axle tube on pass. side about the middle of the tube. Car does good in heat race but I'm burning up the rr in the main and loose off. The angle is about 3/4 inch down off the frame and just below the axle tube. I'm running on IMCA tires and car weighs 3300lbs. Let me know if ya need to know anything else. Thanks in advance. Race

RACEINMUD
Dirt Freak

Total posts: 323
posted August 12, 2005 08:30 AM  
ttt

21racer
Dirt Full Roller

Total posts: 56
posted August 12, 2005 08:45 AM  
panhard bar helps you get into the corner more angle if loose not much help off, you should look at other things like stagger, cross weight, and spring rates first

Back to the Archives