Visit The Dirt Forum for More Information

Author Topic:   4 Bar and Z link plugs
Dirt Roller

Total posts: 25
posted August 08, 2005 10:25 AM  
Has any one seen plugs installed on the lower link on a 4bar and another on the rear link of a Z. What are the +&-'s of running this setup?

Dirt Full Roller

Total posts: 40
posted August 08, 2005 11:38 AM  
putting plugs on the lowers can reduce rollsteer without effecting fowardbite to can also put more indexing on the spring. well that is if you float the spring...a good starting point is 2 inches smaller on the lower car is going to need plugs too since the car was made for a 3-link... this is where most people make there mistake when going from a 3-link to a 4-link...

Back to the Archives