Visit The Dirt Forum for More Information

Author Topic:   Set for 4link / z link - Need opinons
Dirt Full Roller

Total posts: 30
posted July 31, 2005 04:10 PM  
Got a metric car with metric lowers,the rear is a clamped up 4link,with a z link rr with spring on top of housing clamped up only bars are floated.Is this close: rf 850 lf 750 rr225/200 lr 225.about 60 lbs of left rear.15 degrees lr upper angle and 5 degrees lr lower angle.rr lower bar up 5 degrees and for tacky lr z bar down 10degrees and flat for dry.Is this close or does anyone else have any suggestions ? Thanks...Isn't this like a shyrock / hughes set up ?

Dirt Full Roller

Total posts: 58
posted July 31, 2005 04:46 PM  
this might help

Dirt Roller

Total posts: 18
posted August 02, 2005 11:48 AM  
I think your front springs are to light. With the metric lowers I think you should be closer to 1000#.

Dirt Roller

Total posts: 5
posted August 02, 2005 01:33 PM  
Depending where your front roll center is you should have no problem running 800rf/700lf to a 850rf/750lf with the metric lowers. Would not go any heavier. As for the rear I would start with a 200/225 on the lr and 175 on top of the axle on the rr.

Back to the Archives