Visit The Dirt Forum for More Information

Author Topic:   Pierce Rear Torque Arm Setting
old racer
Dirt Maniac

Total posts: 112
posted July 27, 2005 10:10 AM  
What is the proper way to set the Torque arm setting on the Pierce rear set up. It is clamped 4 bar with pullbar and the torque arm used for braking. I need to know how to set the chain and or slack.
Thanks in advace.

Dirt Forum Champ
Total posts: 505
posted July 27, 2005 10:45 AM  
Loosen the pull bar, set the pinion angle with the chain tight, then preload the pullbar.

Back to the Archives