Visit The Dirt Forum for More Information

Author Topic:   Pan hard bar height
Dirt Roller

Total posts: 16
posted July 23, 2005 10:07 AM  
What height are you guys running your pan hard bars at, measured from the ground to the center(average of both ends)? Are they long or short and are they on the front or back of the housings? I was just curious what everyone is running, I keep lowering mine. It is a long bar (28In) on the back of the housing and it is at 11 inches high with about 10 degrees of angle. I was told (by our track champ) that as a general rule to have the bar line up or point at the outside edge of the RR Tire. Any thoughts....

Back to the Archives