Visit The Dirt Forum for More Information

Author Topic:   harris front end
bp22m1
Dirt Full Roller

Total posts: 69
posted July 10, 2005 09:20 PM  
what spindles and control arms do u guys suggest for a 96 harris? 68-72 chevelle clip. i mean is there any product that is better then the next. and i need spindles for a 68-72 chevelle along with control arms right. thank you.

CUSTOMPERFORMANCE
Dirt Forum Champ
Total posts: 1172
posted July 10, 2005 11:58 PM  
Prior to 99 they all used 81 and later full sized gm spindles either the 11" or 12" with extended upper and lower balljoints with 8 3/4 upper arms with 1 1/4 " offset. I have lower control arms if interested and can ream a pair of spindles for ya too. Also you can convert them to use the pinto spindles but somewhat harder to find and cost more unless new pinto spindles are allowed. If ya need more info send me a private message.

22Power
Dirt Full Roller

Total posts: 41
posted July 12, 2005 08:31 AM  
OR YOU COULD CALL HARRIS BECAUSE THEY ARE THE REAL MANUFACTURER AND DESIGNER OF THE HARRIS COMPONENTS.
800-833-5174

autoshop
Dirt Freak

Total posts: 298
posted July 12, 2005 11:31 AM  
22power, just a FYI
Customperformance used to build Harris's chassis for them

22Power
Dirt Full Roller

Total posts: 41
posted July 12, 2005 12:42 PM  
yeah, i know.

avenger 11
Dirt Forum Racer

Total posts: 88
posted July 12, 2005 03:29 PM  
Cheaper than Harris,and easier to get along with than Clark by far.

CUSTOMPERFORMANCE
Dirt Forum Champ
Total posts: 1172
posted July 12, 2005 04:04 PM  
If it werent for my current day job and the fact i live in Des Moines I would consider going to work for them again.

HarrisMod#30
Dirt Freak

Total posts: 353
posted July 12, 2005 06:39 PM  
quote:
Originally posted by avenger 11:
Cheaper than Harris,and easier to get along with than Clark by far.

Clark who? What rock have you been under?

flowers99
Dirt Roller

Total posts: 22
posted July 13, 2005 03:45 PM  
I guess i've been asleep. What's new at Harris? Is Clark out?

HarrisMod#30
Dirt Freak

Total posts: 353
posted July 13, 2005 03:55 PM  
Yes, there just waiting for there new shop to be finished up in Boone.

avenger 11
Dirt Forum Racer

Total posts: 88
posted July 16, 2005 04:55 AM  
Harrismod30,who owns it until Logue takes over,Clark does,and he has ran off alot of customers in the short time that he owned it.

HarrisMod#30
Dirt Freak

Total posts: 353
posted July 16, 2005 11:48 AM  
Well maybe if you made your comment a few weeks earlier Id renig, Im not going to dispute your feelings for Clark because i carry the same feelings. Look for bigger and better things, I dont know John Logue personally but when he was at one of our local tracks clear up here in Wisconsin testing set ups he looked me straight in the eye and said" Customer service will be number 1" And he was very sincere about it. In fact i can see this already, we are currently expirementing with a setup he had in that night and he gave me his cell phone number and said call anytime if you run into problems! That deal is over and done with so all you guys on here bashing harris let it rest, Its over!

CUSTOMPERFORMANCE
Dirt Forum Champ
Total posts: 1172
posted July 16, 2005 04:49 PM  
Not sure if some of you know but at one time in the early 90's or late 80's Logue built the Harris chassis when he worked there for a short time.

Back to the Archives