Visit The Dirt Forum for More Information

Author Topic:   frame / tie rod clearance
Dirt Maniac

Total posts: 134
posted July 04, 2005 08:56 AM  
problem is during corning on the throttle the rf frame rolls over and hits the tie rod .
73-77 stub & impala spindles. I don't want to cut or notch the under side of the frame , also i don't know if that is imca legal.

Can I put a bump steer spacer like dirt works & others do with pinto spindles on for more clearance, or will I be creating a bigger problem. thank you

Dirt Maniac

Total posts: 200
posted July 04, 2005 10:42 AM  
Try a inner tierod end for a 80 camaro they have about a 1" drop that is what the pierce cars run to stop that problem

Back to the Archives