Visit The Dirt Forum for More Information

Author Topic:   need some setup help
the_one
Dirt Full Roller

Total posts: 49
posted May 06, 2005 11:42 AM  
I have an 05 hoffman the car is good getting in and has good fb but in the middle of the corner when you get on the throttle it wants to push my set up is this

rear% - 56
cross%- 51
lrb(wd)- 140lb
stright pan hard 8in up on frame center of rearend (cant go lower on frame due to the plugs)
both rear springs on coilovers
lfs - 650
rfs - 800
lrs - 250 behind on bc
rrs - 225 infront on bc
the car is 4link both sides(with plugs in lower bars)
lrub - 20*
lrlb - 5*
rrub - 15*
rrlb - 0*
thanks in advace for any ideas I just want to get the car to turn in middle for this week im puting a spring slider on the left rear behind

Xtreme12x
Dirt Forum Champ
Total posts: 874
posted May 06, 2005 11:50 AM  
take the car to the track like it is, take 2 turns out of the lr and put 2 in the rr and try it for hotlaps... that is a LOT of left rear for a hoffman car, we had some sucess with RR on a dirtworks car last year. I'd just take some of that lr out..
Your panhard mount should slide lower, you might take and whack the outside off of it and see if it'll fit, we had to do that and we run the plugs in ours too.

the_one
Dirt Full Roller

Total posts: 49
posted May 06, 2005 12:22 PM  
i run the panhard to the outside hole

Xtreme12x
Dirt Forum Champ
Total posts: 874
posted May 06, 2005 11:10 PM  
are you running imca??? If not shorten that bar up to the opposite side

Back to the Archives