Visit The Dirt Forum for More Information

Author Topic:   floater bearings?
DEEDDUDE
Dirt Maniac

Total posts: 157
posted April 15, 2005 05:43 PM  
Do you have to pack the bearings in a floater hub or do they get lubed by the rear gear oil? Thanks for the help.

Racer X
Dirt Freak

Total posts: 256
posted April 15, 2005 08:08 PM  
You have to pack them.

donslink1
Dirt Freak

Total posts: 318
posted April 16, 2005 12:53 AM  
If you dont run Axle seals, You dont have to grease them, If you do run Axle
seals, It is a good Idea to run them.

donslink1
Dirt Freak

Total posts: 318
posted April 16, 2005 12:54 AM  
I mean it would be a good Idea to pack them,

DEEDDUDE
Dirt Maniac

Total posts: 157
posted April 16, 2005 06:00 AM  
Thanks for the help. I run seals on both sides. When I disassemble the hubs there was no grease and plenty of gear oil. I assumed it would need grease, but didn't see any. Thanks again for the help

340duster
Dirt Maniac

Total posts: 195
posted April 19, 2005 09:15 AM  
Sounds like you need new seals

Back to the Archives