posted April 11, 2005 08:12 PM
Have a DW8.Putting the A1 4 bar cages on.Called Dirtworks for a measurement and they were no help.Is there a measurement from the center of the pinion to the birdcage for these.I could eye them up but there must be a better way.
dirtbuster Dirt Forum Champ
Total posts: 2007
posted April 12, 2005 08:14 AM
If you have the rearend set to their specs (16 1/4" from frame rail to pinion) then I beleive the measuremnet you need is 20" to the inside of the BC from the pinion. That shoudl work or get you close, then i'd fine tune them based on your individual car. You may need to move them a little one way or the other.