Visit The Dirt Forum for More Information

Author Topic:   starters.....
imcaracer84
Dirt Full Roller

Total posts: 33
posted April 11, 2005 02:21 PM  
I am having alot of trouble keeping starts in my mod. I have tryed stock ones, after market ones, and the tilto mini starters. the stock ones onlt last one or two nights, the after market ones maybe a month. this is on several differant motors as well. Any ideas????

2nd2none
Dirt Forum Champ
Total posts: 755
posted April 11, 2005 04:03 PM  
is it burning them up, eating the bendix off them? How do you wash the car? If you are blasting the cr ap out of them with high pressure water gets inside and rust them up. Bendix wearing off is most likely an alignment issue.

[This message has been edited by 2nd2none (edited April 11, 2005).]

sixwillwin
Dirt Freak

Total posts: 493
posted April 11, 2005 04:14 PM  
Sounds like me until I got rid of the stupid welded advance dist, and went with a MSD billet dist with the advance and bushings, it made a world of diff. on starter wear...just wondering if you are using a similar setup?

------------------
The Joy of Six website

nyimcamod8t
Dirt Full Roller

Total posts: 67
posted April 12, 2005 07:14 PM  
what size is the battery cable running to the starter from the battery? If the battery cable is too small it will starve the starter of power, thus making it strain more to turn the engine over and burn them up prematurely. I had a problem with that a few years back because we got goofy and tried running 6 gauge battery cable in the car to save weight.

Back to the Archives