Visit The Dirt Forum for More Information

Author Topic:   headers for a grt.chassis #373
21dirtracernw
Dirt Full Roller

Total posts: 29
posted March 16, 2005 10:14 PM  
Hey I have a small problem. and you guys out there have been a big help to me in the past..
Last week you guys answered my question on fulid for a bert trany..

this time its about headers for this grt too. The frame # is 373 and I am trying to get the right headers to clear the frame rails.. Any help out there again is a big help to us..

ps. a part # would be great too..

Thanks again..

FlyNLoIMCA17
Dirt Forum Champ
Total posts: 753
posted March 17, 2005 01:22 AM  
I'm not sure on the EXACT header it uses, but I'm pretty sure you can use the straight out type. Check www.speedwaymotors.com

also www.schoenfeldheaders.com

you might can call speedway or schoenfeld if no one on here has a definate answer for you.

Hope that helps!

NJantz
Dirt Forum Champ
Total posts: 755
posted March 17, 2005 06:13 AM  
Here is what you need if you have regular stock chevy exhaust ports:
http://www.secureperformanceorder.com/Dynatechstore /getproduct.cfm?CategoryID=40&ClassID=314&SubclassID=1477&ProductID=5987


I've got a set of used ones that have had a few stress cracks welded up on them that were on my old GRT mod for $50 if you want them.
[This message has been edited by NJantz (edited March 17, 2005).]

[This message has been edited by NJantz (edited March 17, 2005).]

Dman
Dirt Freak

Total posts: 270
posted March 17, 2005 08:39 AM  
Why don't you try calling Gary at GRT.Its always better to go to the source. 501-679-2311.

Back to the Archives