Visit The Dirt Forum for More Information

Author Topic:   Spring hitting 4-bar
BUMPSTEER
Dirt Roller

Total posts: 7
posted March 04, 2005 09:17 PM  
Has anyone had trouble with the spring hitting the lower bar on the RR (4-link)using the coilovers. It's a dirt works with dirt works birdcages. If I space the mount in on the b/c, will I have to weld a new shock mount on the frame to keep the shock at the same angle?

the_one
Dirt Full Roller

Total posts: 49
posted March 04, 2005 09:50 PM  
can you space the bar out alittle and the shock alittle kinda split the diff. just a thought

[This message has been edited by the_one (edited March 04, 2005).]

wfoondirt
Dirt Forum Champ
Total posts: 505
posted March 04, 2005 09:56 PM  
Can you turn the coilover over so the spring is near the top?

the_one
Dirt Full Roller

Total posts: 49
posted March 04, 2005 10:02 PM  
yea i didn't think to ask if he was running the sping up or down on the shock body

[This message has been edited by the_one (edited March 04, 2005).]

nyimcamod8t
Dirt Full Roller

Total posts: 67
posted March 05, 2005 09:26 AM  
we had the same problem on our Harris,all we did was flip the shock over and run it upside down. the only other option would be Krc makes a spacer to move the bottom spring cup up, but your gonna lose some compression travel by doing that route.

[This message has been edited by nyimcamod8t (edited March 05, 2005).]

Back to the Archives