Visit The Dirt Forum for More Information

Author Topic:   heim spacer?
Dirt Maniac

Total posts: 200
posted March 04, 2005 07:05 PM  
Does anyone make a spacer to take a 3/4" hiem with a 3/4" down to a 5/8" hole

Dirt Forum Champ
Total posts: 505
posted March 04, 2005 09:38 PM  
Edit: Ahh **** the direct link don't work.


Search for p/n 6381K531

ChassisShop has 3/4" rod ends with 5/8" ball.

[This message has been edited by wfoondirt (edited March 04, 2005).]

Dirt Forum Champ
Total posts: 1261
posted March 04, 2005 09:38 PM  
Cut the head off a 3/4 bolt then drill it to 5/8 i do it all the time! Then if i need space on the sides i take my treaded rod 3/4 or 5/8 and drill it out and cut what size i need.

Dirt Full Roller

Total posts: 49
posted March 04, 2005 09:44 PM  
call this number the place is in mo. it call scp (636)677-1320 i think the part is made by umb machine might be wrong. hope that helps.

Back to the Archives