Visit The Dirt Forum for More Information

Author Topic:   Front track width
A&M Motorsports
Dirt Maniac

Total posts: 117
posted February 25, 2005 05:05 AM  
Can any of you fine gentlemen tell me the front track width using a chevelle clip and pinto spindles. Hub to hub dimensions will do just fine.

------------------
Artie Perilloux
A & M Motorsports

WPP
Dirt Freak

Total posts: 451
posted February 25, 2005 06:19 AM  
Hello artie i think it is 62 inches but not for sure on that

tilley88
Dirt Forum Champ
Total posts: 879
posted February 25, 2005 08:15 AM  
62" using the '68-'72 clip, closer to 61" using the older clip.

A&M Motorsports
Dirt Maniac

Total posts: 117
posted February 25, 2005 09:11 AM  
Hey WPP, long time no hear or see. I am in the process of installing a chevelle clip on my late model sportsman. I have a 60" rear, just needed to know where to place the clip.

------------------
Artie Perilloux
A & M Motorsports

nut3d
Dirt Freak

Total posts: 331
posted February 26, 2005 04:00 PM  
Hey artie are you tryin to build another modified. again with that sportman of yours.

A&M Motorsports
Dirt Maniac

Total posts: 117
posted February 28, 2005 06:35 AM  
Aaron, I,m getting it done. The chevelle clip is already under it and I have replaced all the 2x2 tubing with 1.5" round and half finished with a new rear clip.

------------------
Artie Perilloux
A & M Motorsports

waltonjr1
Dirt Forum Champ
Total posts: 516
posted February 28, 2005 06:49 AM  
Artie, hope you get it done soon, A&M Motorsports will have a car in every class! If you need some help give me a call.

[This message has been edited by waltonjr1 (edited February 28, 2005).]

Back to the Archives