Visit The Dirt Forum for More Information

Author Topic:   Driveshaft length
XC man
Dirt Full Roller

Total posts: 39
posted February 22, 2005 07:39 PM  
Putting the finishing touches on a new car and need advice on drivshaft length . Rear suspension is a three link . Just to try it I put the driveshaft from my other car on it and with a 7" yoke I have 2" of exposed yoke which leaves 3and a half inches of engaged splines inside the yoke . When the driveshaft is on the other car there is only 1" of exposed yoke showing which gives 4 1/2 " of engaged splines . Which one is a better choice ?

Dirt Forum Champ
Total posts: 874
posted February 22, 2005 10:04 PM  
I don't exactly understand the 2 choices but I can tell you you'll want at least 2 inches sticking out of the tranny for sure if not 3...

unregistered Total posts: 874
posted February 23, 2005 03:06 PM           send a private message to Xtreme12x   Edit/Delete Message   Reply w/QuoteBBBBBB
2" is perfect. 1" might lead to the yoke getting into the tail piece and breaking it.

Back to the Archives