Visit The Dirt Forum for More Information

Author Topic:   pull bar mounting ?
dan ferry
Dirt Maniac

Total posts: 183
posted February 05, 2005 07:07 PM  
my thrown dirt chasis is set up for lift bar with fifth coil and shock on top of rear end all of which i didnt get with my car, id like to put a a short pull bar on it and wondering can i get one that eliminates the need for the shock which i think thet do any opinions or pics of set up would greatly be appreciated

44nymod
Dirt Maniac

Total posts: 120
posted February 06, 2005 06:48 AM  
Afco makes a pullbar now that the spring works both ways during torque and on braking. So this would eliminate the shock!

boas51
Dirt Maniac

Total posts: 190
posted February 06, 2005 07:42 AM  
the damper shock is angled up to the frame, while the pullbar is angled down. even a double sprung pullbar will not accomplish the same effect as the damper shock.

JT54
Dirt Maniac

Total posts: 170
posted February 06, 2005 10:30 AM  
we dont use a damper any more and car works alot better.

sdracer12
Dirt Maniac

Total posts: 180
posted February 06, 2005 10:43 AM  
Dan, which tire are you on? With the Hoosiers we don't use a damper shock at all. With Amer. Racers we only use the damper shock to tighten entry on a dry slick. I use an Afco springbar for the pullbar.

How short of a pullbar are you talking? 20" long, maybe?

dan ferry
Dirt Maniac

Total posts: 183
posted February 06, 2005 12:01 PM  
thanks for replies im on hoosiers we are now amra sanctioned trackfast 1/2 mile A,D,H 40's as for length of pullbar i'm open for suggestion i only have the shock mount so im gonna build the mount for the front of pull bar my car has 2 bars that start at the shock mount and go at angles to left and right side of car i was thinking of finding the angle i need for the bar and welding a piece of 2x2 horizontal from one bar to the other and finding a 4 hole mount that i could put on the 2x2 and could slide it left to right and use the holes to change bar angles. any thoughts on were to find this type of mount or is this not gonna work.

Back to the Archives