posted February 05, 2005 03:51 PM
how much split has anyone ran in the front and the back. i have my %'s exactly were i want it then when i get in and i have someone scale it, it is 50 lbs different what should i do????
dirtbuster Dirt Forum Champ
Total posts: 2007
posted February 05, 2005 04:40 PM
Pick one way or the other driver in or driver out and do it the same all the time. Scaling is just so you have a baseli9ne to go back to. If you do it without the driver everytime and the car works itdoesnt matter what it is with you in it. There is no way to get the % where you want them and then get in and not have them change. You are adding a large amount of weight in the seat and there is no way to keep the % the same whether you are in the car or not.
Fastride 38 Dirt Maniac
Total posts: 125
posted February 05, 2005 05:50 PM
hoosier transplant Dirt Maniac
Total posts: 104
posted February 05, 2005 06:10 PM
I used to put 175# of weight in my seat when I was in the garage by myself. That worked pretty good also-almost exactly same readings as when I was setting in car and my buddy taking the readings. Just a thought.
Desert Mod Dirt Full Roller
Total posts: 60
posted February 05, 2005 08:01 PM
I do that too. I took a bunch of round one and three gallon plactic plant containers, taped over the bottom hole and filled them with concrete. I also bent up some old brass rods I had laying around to use as handles. I made a few extra and coded them all so I could change the weight totals I put in the car. I even put them in to set the front end.