posted January 30, 2005 10:26 AM
What length of drive shaft and front yoke do i need? Engine setback is 72.1" Using the short narrow yoke on gears. Running a Brinn. 4-bar z-link rear. How much yoke in and out of the tranny?
LATE MODEL 9W Dirt Full Roller
Total posts: 66
posted January 30, 2005 01:04 PM
Mine is a Pierce car running a falcon trans, same as brinn. My driveshaft is 29 1/2" with the longer yoke on the 3nd member and the longer yoke on the tranny.
jason lee Dirt Roller
Total posts: 10
posted January 30, 2005 09:15 PM
we have a different wheelbase but the way we do our is set the wheel base and then jack the car up so the wheels droop in the back like its up on the bars and take a mesurement , and we just run a regular yoke , havent had any problems, hope this helps