Visit The Dirt Forum for More Information

Author Topic:   2 link brackets on Harris 2 link
gould
Dirt Forum Champ
Total posts: 730
posted January 24, 2005 07:02 PM  
I hope this makes sense to someone, lol. I have to remove the brackets on my rearend and move them inward. This would be the brackets that the trailing arm, spring slider, and shock hook up to. I have to move these because I'm having a interference problem. I got the dimensions from the bottom bolt for the center section to the centers of the bolt holes on the brackets. These dimensions are from my Harris set up sheets. What they don't tell me is what I'm looking for. I'm sure these need rotated a certain way for the spring and shocks to work properly. Are they supposed to be perpendicular to the face of the rearend housing, like where center section bolts to?

------------------
www.geocities.com/gouldracing11

Wildside17
Dirt Maniac

Total posts: 119
posted January 24, 2005 07:58 PM  
Gould I sent you a PM

gould
Dirt Forum Champ
Total posts: 730
posted January 25, 2005 05:38 PM  
called Harris today, got what i needed

Back to the Archives