Visit The Dirt Forum for More Information

Author Topic:   metric steering help
bobby hill
Dirt Roller

Total posts: 15
posted January 23, 2005 12:29 PM  
I am hoping you guys can help me, I run a metric stub with nova lowers and pinto spindles, wheels scrub the frame when turned right but only turn about half way to the left. The chassis builder said that the pitman and idler are from a chevelle and the center link is from a iroc camaro can anyone give me part numbers to fix this ?

Dustejr73
Dirt Maniac

Total posts: 177
posted January 23, 2005 01:26 PM  
i have the same setup minus the iroc draglink. i tried one and you will find out that it is too wide and when centered on the a arm pivot points it offsets your steering to one side. i went to the stock metric draglink with bumpsteer spacers on the spindles. i have no problem. i believe you the 68-72 chevelle pitman and idler arm. any auto parts store can help you with the part numbers.

Back to the Archives