Visit The Dirt Forum for More Information

Author Topic:   mig wire dia. for cage
wingnut
Dirt Maniac

Total posts: 134
posted January 21, 2005 09:29 PM  
What size wire do you chassis builders use .030 or .035 ? trying to figure out which would be better for a few repairs.
Thank you

LATE MODEL 9W
Dirt Full Roller

Total posts: 66
posted January 21, 2005 09:31 PM  
.035, 030 IS A LITTLE SMALL.

Drdirt
Dirt Roller

Total posts: 11
posted January 21, 2005 10:30 PM  
.035 wire

Elmo
Dirt Forum Racer

Total posts: 79
posted January 21, 2005 10:36 PM  
I allway's used 35 in the past. But on the thinner tubing used in alot of Mods I seem to have better luck with 30.

Wildside17
Dirt Maniac

Total posts: 119
posted January 21, 2005 10:53 PM  
Whichever you are most comfortable using.

tilley88
Dirt Forum Champ
Total posts: 879
posted January 21, 2005 11:45 PM  
.030" works well on gas w/220 volt welder.

CUSTOMPERFORMANCE
Dirt Forum Champ
Total posts: 1172
posted January 22, 2005 12:34 AM  
Also depends on the size of your welder. I used .030 with my 150 welder and then I went up to the .035 on my new 210 welder.

gould
Dirt Forum Champ
Total posts: 730
posted January 22, 2005 05:27 AM  
3/32" E6011

Back to the Archives