Visit The Dirt Forum for More Information

Author Topic:   Rear Gear
Dirt Full Roller

Total posts: 39
posted January 17, 2005 03:16 PM  
Going to be running a Mod on 1/3 mile high banked oval with a three speed trans. Was wondering what would be a good starting point for rear gear size. Car has a 360 ci motor and ford 9 in. rear. Any help would be greatly appreciated.


unregistered Total posts: 39
posted January 17, 2005 03:43 PM           send a private message to Matt22   Edit/Delete Message   Reply w/QuoteBBBBBB
If your final drive ratio is 1:1 then a 5.83 should turn 7000-7200.

Dirt Maniac

Total posts: 119
posted January 17, 2005 08:50 PM  
I am going to say 6.00. We had 5.83 and wasn't quite enough on a 3/10 high bank. On IMCA tires

[This message has been edited by Wildside17 (edited January 17, 2005).]

Back to the Archives