Visit The Dirt Forum for More Information

Author Topic:   PANHARD BAR MOUNT??
G17RACING
Dirt Full Roller

Total posts: 45
posted January 03, 2005 12:58 PM  
Does any one know where to find a steel mount w/ double holes on the outside of the chassis. Like the one on the Rocket page.
Here is a link to a picture it is alum. http://www.rocketchassis.com/04Catalog/32RearSuspension.pdf

Xtreme12x
Dirt Forum Champ
Total posts: 874
posted January 03, 2005 01:03 PM  
Southwest Speed Has them

FlyNLoIMCA17
Dirt Forum Champ
Total posts: 753
posted January 03, 2005 03:47 PM  
Southwest Speed and I think Smiley's has them

[This message has been edited by FlyNLoIMCA17 (edited January 03, 2005).]

sdracer12
Dirt Maniac

Total posts: 180
posted January 03, 2005 05:10 PM  
Call Rick at R.A. Benson Motorsports in Galesburg, IL. I'm sure they carry them too.

G17RACING
Dirt Full Roller

Total posts: 45
posted January 11, 2005 08:22 AM  
Niether Southwest or Smiley's has them. I haven't tried Benson yet. Any other suggestions?

hasben
Dirt Full Roller

Total posts: 26
posted January 11, 2005 10:48 AM  
Go to twmracing.com they are the ones that make them for rocket. Certainly they can build a steel bracket.

GRTWallbanger
Dirt Maniac

Total posts: 196
posted January 12, 2005 04:15 PM  
I have been looking for a long bracket also.
The word i am getting (from BSB)is it will cost more to make a steel one then aluminum because of the cost of steel these days?So here is another rule imca has to make the cost of mods more$$$$$$

Xtreme12x
Dirt Forum Champ
Total posts: 874
posted January 12, 2005 04:17 PM  
Southwest Speed makes them, trust me, i own about 4 of them.

Xtreme12x
Dirt Forum Champ
Total posts: 874
posted January 12, 2005 04:18 PM  
Southwest Speed makes them, trust me, i own about 4 of them.

Xtreme12x
Dirt Forum Champ
Total posts: 874
posted January 12, 2005 04:21 PM  
http://twmracing.com/prod.php?prodNum=17&prodDetail=y

GRTWallbanger
Dirt Maniac

Total posts: 196
posted January 12, 2005 07:23 PM  
Does southwest speed have a web site??
I dont see a steel one on the TWM site that has the 2 sets of holes on one side?

FlyNLoIMCA17
Dirt Forum Champ
Total posts: 753
posted January 12, 2005 09:06 PM  
www.southwestspeed.com

they are rebuilding their site so just go to that link and request a catalog. its free and mine was delivered like 3 days after I ordered it

Back to the Archives