Visit The Dirt Forum for More Information

Author Topic:   3 Link 9" Springs?
MadMax1
Dirt Roller

Total posts: 8
posted November 24, 2004 08:21 PM  
I have A 3 link setup w/solid tork bar 1/2 in rear steer- 2500lb w/driver.Springs unknown.Car goes into turn great but is all over the place on exit.Car wont drive at all on wet track.What do you think will help the most?

------------------
American Lift

dan ferry
Dirt Maniac

Total posts: 183
posted November 24, 2004 09:03 PM  
get rid of solid torque bar and go frim there,make shure r.r. tire is inside of r.f., and get rid of rear steer as your calling it square up or run left side 1/2 to 3/4 longer than right this will help keep car from sliding up coming out. just a thought im new to mods also... definitly find out what springs and percentages you have

[This message has been edited by dan ferry (edited November 24, 2004).]

donslink1
Dirt Freak

Total posts: 318
posted November 24, 2004 10:25 PM  
Our cars right rear tire is straight up with the right front and we can get it to do what ever we want. Springs are a nice thing to know

mod70
unregistered Total posts: 318
posted November 24, 2004 11:13 PM           send a private message to donslink1   Edit/Delete Message   Reply w/QuoteBBBBBB
Is that left leading or right? Post more numbers to get best response; springs, shocks, percentages, offsets, bar angles, anything you have would help us in diagnosing your problem.
Typacly a car that goes in well but is loose on exit is light on cross, not enough rear split, or soft on front springs.

[This message has been edited by mod70 (edited November 24, 2004).]

Back to the Archives