Visit The Dirt Forum for More Information

Author Topic:   frame drawings?
ALCOHOL
Dirt Full Roller

Total posts: 46
posted October 10, 2004 02:02 PM  
Does anyone know where cad drawings or the like could be had for the 68-72 GM frame and also the metric frame?

Ego Racing
Dirt Forum Champ
Total posts: 724
posted October 10, 2004 07:34 PM  
Body shop!

ALCOHOL
Dirt Full Roller

Total posts: 46
posted October 12, 2004 01:19 PM  
checked with local body shop,,,their computerized frame machine doesn't go back that far,,,shucks! Anyone else have ideas?

IowaFuzzy1
Dirt Maniac

Total posts: 136
posted October 12, 2004 11:20 PM  
Where are you located ?I have frame charts and would be glad to send you copies

ALCOHOL
Dirt Full Roller

Total posts: 46
posted October 13, 2004 08:06 PM  
Hey thanks,,,,,,Rodney Deal,,,,332 South West St,,,,,Brownstown, Illinois 62418

scp00z
Dirt Newbie

Total posts: 4
posted October 21, 2004 10:50 AM  
Hey IowaFuzzy1 or Alcohol is there anyway you could send me a copy as well. I'm working on laying out the 68-72 frame in Solid Works. Thanks
Steve Picou
3475 High Ridge Blvd.
High Ridge, MO 63049

ALCOHOL
Dirt Full Roller

Total posts: 46
posted October 21, 2004 07:52 PM  
Steve,,I haven't seen or heard a word from anyone yet ,,,,,If I do,,,I'll fire you a copy,,,Rodney

IowaFuzzy1
Dirt Maniac

Total posts: 136
posted October 21, 2004 10:28 PM  
Hey guys I got the small and wide metric charts copied yesterday and will get them in the mail tomorrow the chevelle charts didn't come out very clear I am redoing them to darken them up and will get them out ASAP sorry for the delay.

scp00z
Dirt Newbie

Total posts: 4
posted October 22, 2004 05:41 AM  
Sounds great, thanks for your help guys.

Kromulous
Dirt Forum Champ
Total posts: 796
posted October 22, 2004 06:32 AM  
Thanks IowaFuzzy1, much appreciacted.

jammin
Dirt Administrator

Total posts: 6243
posted October 22, 2004 08:09 AM  
Thanks Iowa Fuzzy,,,great help

ALCOHOL
Dirt Full Roller

Total posts: 46
posted December 11, 2004 07:40 AM  
Iowa Fuzzy,,,,I'm still waiting for the frame drawings,,,I'd be glad to pay you for them. Make me a good Christmas present,ha ha...

mavrik82
Dirt Forum Racer

Total posts: 93
posted December 12, 2004 07:40 AM  
THANX FUZZY!!! The Chevelle drawing in the toolbox is excellent! Can anyone tell me how to print it from the toolbox? When I try, I only get the front 1/3?
Thanx again!

ALCOHOL
Dirt Full Roller

Total posts: 46
posted December 12, 2004 03:52 PM  
I need the drawing that shows top view. I need measurements on top a-arm mounts, Thanks anyway.

DMA Racing
Dirt Maniac

Total posts: 129
posted December 12, 2004 04:35 PM  
some for a camaro would be nice
mid, 70's

[This message has been edited by DMA Racing (edited December 12, 2004).]

rickbraley
Dirt Full Roller

Total posts: 58
posted December 14, 2004 02:20 PM  
Please forgive me for my ignorance here but exactly where is the "toolbox"?

I would like to checkout the drawings...

Back to the Archives