Visit The Dirt Forum for More Information

Author Topic:   X-Factor Pull Bars????????
RACEFAN33
Dirt Forum Racer

Total posts: 98
posted October 04, 2004 09:11 PM  
Thinking of buy one does anybody have any pros or cons of these bars. Going to be used on a 4 bar / z link set up.


de94wcc
Dirt Forum Racer

Total posts: 87
posted October 05, 2004 08:29 AM  
In general, I don't think the biscuit bars are the way to go. You will talk to ten guys and get ten opinions, but everyone I've ever talked to, including ourselves, has had better forward bite with the spring bar. Plus, you don't have to replace a spring every few nights like you do the rubber biscuit! I'm not bashing anyone's product and I'm sure the X-Factor is a great product and would work well for you. I personally would never buy anything but a spring loaded pull bar.

RACEFAN33
Dirt Forum Racer

Total posts: 98
posted October 05, 2004 07:36 PM  
Then what type of spring pullbar would you recommend?????

dirtywrench13
Dirt Freak

Total posts: 324
posted October 06, 2004 06:14 AM  
THE AFCO AND D&M PULL BARS ARE HARD TO BEAT. AFCO HAS A 2 WAY BAR THAT TAKES SOME GETTING USED TO.

de94wcc
Dirt Forum Racer

Total posts: 87
posted October 06, 2004 09:23 AM  
I agree with dirty wrench. We've had good luck with the AFCO bar.

tilley88
Dirt Forum Champ
Total posts: 879
posted October 06, 2004 09:27 PM  
Jeremy, use an x-factor or Monty bar at Bluff, and a spring bar w/ a progressive spring at Malden.

jws
Dirt Maniac

Total posts: 115
posted October 11, 2004 02:51 PM  
Just wanted to also say that the new AFCO two way pull bar will change a car significantly. It tightens the car on entry quite a bit. It's pretty much a dry-slick only device.

Back to the Archives