posted September 14, 2004 12:13 PM
Converting outlaw stock car to 3 link and using a J-bar. my question is......regarding the J bar mount that goes on the gear center section(pinion mount)...can that mount be installed and removed without having to setup the gears each time?????
Xtreme12x Dirt Forum Champ
Total posts: 874
posted September 14, 2004 12:34 PM
yes you will just need 1/2 inch longer bolts to bolt the plate on with
NJantz Dirt Forum Champ
Total posts: 755
posted September 14, 2004 01:14 PM
yep what Xtreme said.
sixwillwin Dirt Freak
Total posts: 493
posted September 14, 2004 05:10 PM
great!! thx alot, it was going to be a bother if I had to get the gears setup/pinion depth checked every time.