Visit The Dirt Forum for More Information

Author Topic:   grt frame??
21dirtracernw
Dirt Full Roller

Total posts: 29
posted September 12, 2004 07:51 PM  
anybody on the west coast out there that knows of a GRT dealer, and can put a new back clip on our mod frame? Its ok from the front of the cell forward. It really ***** that we got it while leading the race. This was the third race on it.

Its a great car.
Any help would be great..


zeroracing
Dirt Forum Champ
Total posts: 1875
posted September 12, 2004 07:59 PM  
since it is so far back it probally will not effect handling much, you may contact a local builder and they may be able to set you up, i am guessing its a swing arm style, as long as tehy put the rear mounts in the same spot roughly the car will handle the same.

dexter
Dirt Roller

Total posts: 19
posted September 13, 2004 05:42 AM  
Here is GRT's #. Hope you can get it back together.

phone: 501.679.2311
fax: 1.800.880.0478
email: info@grteam.com

NJantz
Dirt Forum Champ
Total posts: 755
posted September 13, 2004 06:44 AM  
I shoved the rear clip over a few inches on mine earlier this year. Sounds like your's bent just like mine. Its not too bad at all to reclip. Most of it behind the fuel cell is just structure and not real critical as far as suspension mounts go.

You might try and call GRT, they can build you a rear clip and ship it to you.

21dirtracernw
Dirt Full Roller

Total posts: 29
posted September 13, 2004 09:15 AM  
hey guys thanks for the help, called grt this morning and he told me to get in there with a porta power and some blocks of wood and start pushing it back and go a little bit past center ane it should pop right back in.

its a great car. thanks for the help again.

Back to the Archives