Visit The Dirt Forum for More Information

Author Topic:   Bite problem
turnkey35
Dirt Roller

Total posts: 8
posted September 12, 2004 08:46 AM  
Question We currently run a 4 link LR /z link RR seem to lack forward bite, have done everything we can gets a lil better but not enuff. The driver wants to put the 3 link back in rr not sure exactly what to do. Will this work ? Any suggestions would be appreciated. Only ones that go forward at our track are the ones that 3 whell bigtime

cd2
Dirt Maniac

Total posts: 161
posted September 12, 2004 09:36 AM  
turnkey35,will you please do us all a favor & list the total weight & wheel weights for your car? Also ride heights,springs,shocks,wheel offsets & if the wheels line up front to rear.What type of lift arm or pull bar & how it is mounted.What chassis? Not trying to sound rude but it is hard to give good info.without getting all info.You do this & i'll bet you can get the help you need. Good luck & good racing. cd2

cd2
Dirt Maniac

Total posts: 161
posted September 12, 2004 09:44 AM  
turnkey35,also give the bar angles.Please check with a degree finder & give the degree on each bar.Even with the same ride height 2 diffrent cars can have diffrent bar angles on count of where the mounts are located,so the left top being in the third hole up can be 10 degrees or 20 degrees.See what i'am getting at. Thanks cd2

cd2
Dirt Maniac

Total posts: 161
posted September 12, 2004 10:04 AM  
turnkey35,What tires & air pressure?What size track & how much banking,is it tacky,dry or black slick? cd2

zeroracing
Dirt Forum Champ
Total posts: 1875
posted September 12, 2004 06:13 PM  
are you sure your not getting a bunch of rr bite? i mean the car snap loose on the gas? or justspin tires? many people have a car that snaps loose and say no bite but really just over bite with the rr and makes the car almost spin out.

Back to the Archives