Visit The Dirt Forum for More Information

Author Topic:   pressed in studs in heads
doobersmooth
Dirt Full Roller

Total posts: 31
posted August 24, 2004 11:38 AM  
will guilde plates for push rods work with pressed in studs? and how hard is it to take the pressed studs out and put screw in studs?


foolish farmer
Dirt Roller

Total posts: 7
posted August 24, 2004 12:35 PM  
Converting to screw in studs isn't a major deal. Any machine shop can tap the holes for you. You could do it youself, but make darn sure you get them straight !!

Another option is a rail type rocker, available from comp cams. They are a steel roller tip,where the rocker arm has a lip to keep it straight on the valve tip. I run these and have had no problem.

doobersmooth
Dirt Full Roller

Total posts: 31
posted August 24, 2004 02:29 PM  
thanks

Mark13760
Dirt Full Roller

Total posts: 64
posted August 25, 2004 08:32 PM  
???

Back to the Archives