Visit The Dirt Forum for More Information

Author Topic:   pull bar
thebomb
Dirt Maniac

Total posts: 149
posted August 17, 2004 12:45 AM  
a buddy of mine is running a very eratic 3bar, never looked at till the other night and the pull bar is at most 14 inches long, he says he trying to calm it down, would lengthing this help?? in my mod we run 30" over all with 17 degrees. both with the rubber bisquits

FASTLAP
Dirt Maniac

Total posts: 171
posted August 17, 2004 05:00 AM  
lengthening would certainly help, unless he has alot of angle in that short one, he could try to take some angle out of it first. Long bar = slower, smoother reaction. Short bar = faster, more sudden reaction.

[This message has been edited by FASTLAP (edited August 17, 2004).]

dirtywrench13
Dirt Freak

Total posts: 324
posted August 17, 2004 03:04 PM  
DOES HE USE A DAMPNER SHOCK? IF SO TRY A LONGER BAR OR LESS ANGLE.

thebomb
Dirt Maniac

Total posts: 149
posted August 17, 2004 08:50 PM  
right now the bar is almost flat, and there is no shock either, the guy the car was bought from ran 3/8 and 1/2, we run on a dry slick 1/4. thanx for the replys

Back to the Archives