Visit The Dirt Forum for More Information

Author Topic:   I can't get my mod to work on a 1/4 mile
loopy
Dirt Roller

Total posts: 7
posted August 15, 2004 11:41 PM  
We run a modified with a 4 link full floating rear end housing. It hauls *** on a 3/8 to 1/2 mile track, but on the 1/4 high banked track the left front lifts off the track literally 2 feet and it pushes. So you can't steer coming out of the corner. We've tried moving the bars all the way down and we've set the rear end an inch forward on the left side. Our springs are behind the rear end. The guys who run the springs in the back kick *** . Any help would be awesome.

dirtywrench13
Dirt Freak

Total posts: 324
posted August 17, 2004 03:12 PM  
START WITH THE RIGHT REAR AHEAD OF THE LEFT REAR,THEN ADD SOME SPRING TO THE RIGHT REAR AND FLATTEN THE PANHARD BAR OUT SOME.

loopy
Dirt Roller

Total posts: 7
posted August 17, 2004 04:49 PM  
We'll give it a try. It had a J-bar on it. We're putting a panhard bar on it now.

norightturn
Dirt Maniac

Total posts: 159
posted August 18, 2004 09:57 AM  
Read post "tight n middle". Dont think you will like the panhard. The jbar works real well.

dirtywrench13
Dirt Freak

Total posts: 324
posted August 18, 2004 12:11 PM  
SORRY I USE THE WORD PANHARD AS A GENERAL TERM, WE PREFER TO USE A J-BAR AT ALL TIMES.

loopy
Dirt Roller

Total posts: 7
posted August 20, 2004 12:38 PM  
Oh well, we already put the panhard bar on. We'll see how it works tonight.

Back to the Archives